2. CONTROLS
OPERATION
Mode Selection
1. Slide the mode selector to
the left of the tool to have it
in ‘hammer drill’ mode.
2. Slide the selector to the right
for normal drilling mode.
Speed Selection
The speed selector dial limits the speed range of the variable
speed trigger.
1. Rotate the speed selection
dial clockwise for faster
speeds.
2. Rotate the speed selection dial anti-
clockwise for lower speeds.
Drilling Direction
1. Push the forward/reverse button from the right side of the tool
to put it in forward mode.
2. Push the button on the left of
the tool for reverse mode.
Note:
Drill speed is reduced
when in reverse mode.
Installing Drill Bits
1. Slide the chuck collar backwards
towards the tool to unlock the chuck.
2. Rotate the chuck anti-
clockwise to widen the jaws.
3. Insert the drill bit, making
sure it is centred in the jaws.
4. Rotate the chuck clockwise to tighten
the jaws around the drill bit.
5. Lock the chuck collar by
sliding it forwards.
WARNING!
ENSURE THE DRILL BIT IS SECURELY
ATTACHED AND SPINS CONCENTRICALLY BEFORE
DRILLING.
a.
b.
DRILL
HAMMER
DRILL
FASTER
SLOWER
WARNING!
ENSURE THE DRILL BIT HAS COME TO A
COMPLETE STOP BEFORE CHANGING MODES.