1. Depth Rod
2. Keyless Chuck
3. Chuck Collar
4. Mode Selector
5. Forward/Reverse Button
6. Lock-On Button
7. Power Cord
8. Variable Speed Trigger
9. Speed Selection Dial
10. 360° Side Handle
HAMMER DRILL
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
2
3
4
1
5
6
8
7
10
9
Attaching The Side Handle
The side handle provides additional comfort, control, and guidance
for the hammer drill.
1. Loosen the side handle by turning it
clockwise.
2. Slide the handle onto the
collar of the hammer drill.
Note:
There is an indexing tab
on the right side of the drill.
Ensure that the indexing tab is
properly seated in one of the
slots in the side handle collar.
3. Adjust the handle so that it’s in a
comfortable working position, then
tighten it into place by turning the side
handle anti-clockwise.
Installing The Depth Rod
The depth rod helps to drill to a pre-determined depth.
1. Loosen the side handle slightly
by rotating it clockwise.
2. Adjust the depth rod so the bit
extends beyond the end of the
rod to the required drilling depth.
Note:
The depth rod has grooves in
10mm increments as a guide.
3. Tighten the side handle to lock the
depth rod into place.
4. When the tip of the depth rod touches
the work surface you have drilled to the
required depth.
a.
b.
WARNING!
ENSURE THE TOOL IS TURNED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.