2. CHUCK
3. CONTROLS
2 To start drilling squeeze the
variable speed switch.
3 To stop drilling release the
switch.
1 Open the chuck jaws
slightly larger than the
bit you wish to insert.
4 To ensure the bit is
securely fastened,
insert the chuck
key into 1 of the
3 holes on the
chuck. Turn chuck
key clockwise.
3 Hand tighten the chuck
jaws.
2 Insert the drill bit,
making sure it is
centred in the jaws.
OPERATION
1 To lock the drill on, squeeze
the variable speed switch
(a) then depress the lock
on button (b).
2 Release the variable speed
switch, then the lock on
button.
3 To unlock the drill,
squeeze and release
the variable speed
switch.
Variable Speed Switch
Lock On Button
Keyed Chuck
a
b
a
b
1 Plug the tool into the mains power supply.
5 Repeat this step with the two remaining chuck holes.
WARNING!
THE POWER SUPPLY FOR THIS PRODUCT
SHOULD BE PROTECTED BY A RESIDUAL CURRENT
DEVICE (RATED AT 30MA OR LESS). A RESIDUAL CURRENT
DEVICE REDUCES THE RISK OF ELECTRIC SHOCK.
