ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
KNOW YOUR PRODUCT
SETUP & PREPARATION
1. SIDE HANDLE & DEPTH ROD
1 Chuck
2 Depth Rod
3 Side Handle
4 Mode Selector
5 Forward/Reverse Lever
6 Speed Selection Dial
7 Variable Speed Trigger
8 Lock-On Button
9 Power Cord
HAMMER DRILL
10 Wood Drill Bits x 6
(5/6/8mm)
11 Steel Drill Bits x 6
(5/6/8mm)
12 Masonry Drill Bits x 6
(5/6/8mm)
ACCESSORIES
1 2 3
4
6
5
7 8 9
10
11
12
WARNING!
ENSURE THE TOOL IS OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.
Fitting the Side Handle
Using the Depth Rod
2 Slide the side handle onto the
collar mount of the hammer
drill and secure in place by
rotating the handle clockwise.
1 Loosen the side handle by
rotating the handle anti-
clockwise.
3 Tighten the side handle to
secure the depth rod in this
position.
1 Loosen the side handle by
rotating the handle anti-
clockwise.
2 Insert or adjust the
depth rod so the
drill bit extends
beyond the end
of the rod to the
desired drilling
depth.
The side handle provides additional comfort, control, and guidance for
the hammer drill.
The depth rod helps to drill to a pre-determined depth.
required
drilling depth
