2. LOADING THE GLUE STICK
3. SWITCHING THE GLUE GUN ON
OPERATION
Switching the Glue Gun On
Switching the Glue Gun Off
Installing the Glue Stick
2 Squeeze the trigger flow
control multiple times to allow
the glue stick to be pushed
down.
1 Insert the glue
stick into the glue
stick entry and
slide down gently.
2 The first indicator
light will glow red
and then green to
indicate the glue
gun is on.
WARNING!
ENSURE THE TOOL IS SWITCHED OFF AND
ALLOWED TO COOL DOWN BEFORE PERFORMING ANY
OF THE FOLLOWING TASKS.
WARNING!
THE GLUE GUN NOzzLE AND HEATED GLUE
GUN BECOME HOT WHILE IN USE. IN THE EVENT OF
ACCIDENTAL SKIN CONTACT WITH HOT GLUE, RUN
UNDER COLD WATER IMMEDIATELY.
CAUTION!
THE PROTECTIVE NOzzLE WILL REMAIN HOT
FOR A FEW MINUTES. DO NOT STORE THE GLUE GUN
DIRECTLY AFTER USE. ALLOW THE NOzzLE TO COOL
AND THE GLUE TO SOLIDIFY.
1 Hold the on/off switch down
for 2 seconds to start the glue
gun.
1 Press the on/off switch to stop
the glue gun.
2
sec
Note:
Allow the glue gun to heat up before you start operating.
