3
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
Fitting the motor housing
1. Push the motor housing
fully into the tube aligning
the cutout.
2. Screw tight with the assembly
nut.
1. Blade
2. Motor housing
3. Telescopic shaft
4. Telescopic shaft lock
5. Main shaft
6. Additional handle
7. Shoulder strap bracket
8. Rear handle
9. Pivoting head button
10. Switch lock
11. On/off trigger switch
12. Cord retainer
TELESCOPIC POLE HEDGE TRIMMER
KNOW YOUR PRODUCT
1. SHAFT ASSEMBLY
ASSEMBLY
WARNING!:
TO PREVENT ACCIDENTAL STARTING,
ENSURE THAT THE POLE HEDGE TRIMMER IS
DISCONNECTED FROM THE POWER SUPPLY BEFORE
MAKING ANY ADJUSTMENTS.
11
9
10
Fitting the additional handle
1. Remove the 4 screws from the additional handle, then separate the
two halves.
3. Screw the handle loop to the
handle bracket from underneath
with the 4 screws provided.
2. Slide the handle loop over the rear
handle past the shoulder strap
attachment. Place the handle
bracket on the main shaft as
shown.
1
8
12
2
3
4
5
6
7
