OPERATION
The height adjustment lever provides 5 cutting heights from 25mm to
65mm.
Ensure the cord follows the handle
smoothly from the switch to the body
of the mower.
2. To assemble the grass catcher
align the two halves and push
them together, one side at a
time. Ensure the two halves click
together around the entire middle
section.
1. Assemble the grass catcher
handle onto the opening
on the top half of the grass
catcher. The handle will click
into position when aligned
and fitted correctly.
WARNING!:
WHEN ASSEMBLING THE GRASS
CATCHER BACK TO THE MOWER AFTER
EMPTYING, ALWAYS ENSURE THERE IS NO BUILD
UP OF GRASS IN THE GRASS CHUTE. IF NEEDING TO
CLEAR THE GRASS, ALWAYS ENSURE THE MOWER
IS DISCONNECTED FROM THE POWER SUPPLY
PRIOR TO CLEARING. A BUILD UP OF GRASS IN THE
GRASS CHUTE MAY PREVENT GRASS FROM MOVING
INTO THE GRASS CATCHER EFFECTIVELY.
WARNING!:
DISCONNECT THE MOWER FROM
THE POWER SUPPLY AND ENSURE THE BLADE
HAS STOPPED COASTING BEFORE ADJUSTING THE
HEIGHT.
Securing the Power Cord to the Handles
Assembling the Grass Catcher
Fitting and Removing Grass Catcher
2. PREPARATION
Cutting Height Adjustment
3. To empty the grass catcher, lift the catcher flap with one hand
then lift the grass catcher with the other hand up off the two
raised housing clips.
The catcher must be attached to the two raised hooks on the mower.
1. Lift up the catcher flap with one
hand and guide the catcher over
the two hooks on the mower
housing.
2. Lower the grass catcher in place
and lower the catcher flap. The
catcher flap is held against the
gass catcher by a spring.
Grass Catcher Volume Indicator
To alert you that the grass catcher
is full, the mower provides a volume
indicator.
Indicator floats up when empty.
Indicator is down when full.
Empty
Full
1. Push the lever inwards
towards the mower body.
2. Adjust the lever to the desired
cutting height.
3. Release lever check that it is
securely seated in the required
cutting height.
Using the Cord Retainer
The cord retainer prevents the extension lead (not included) from
being disconnected during use. Only use Heavy Duty extension lead
suitable for outdoor use with electric garden tools, no longer than 25
meters.
1. Make a loop with the extension
lead (socket end of lead)
through the loop and secure
over the hook.
CAUTION:
BE CAREFUL DURING CUTTING HEIGHT
ADJUSTMENTS OF THE LAWN MOWER TO PREVENT
ENTRAPMENT OF THE FINGERS BETWEEN MOVING
HEIGHT ADJUSTMENT LEVER AND THE MOWER
HOUSING.
2. Once fitted, connect the lawn
mower power plug into the
extension lead socket.
3. Assemble the grass catcher
top onto the bottom half of the
grass catcher assembled in
step 2. Align the two halves
and push each individual
plastic lug into its opposite
location.
1. Secure the power cord from the
switch housing to the lower handle
as shown.
