ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
KNOW YOUR PRODUCT
SETUP & PREPARATION
1. Motor cover
2. Lifting handle
3. Lower handle
4. Cord retainer
5. Safety switch
6. Upper handle
7. Height adjustment lever
8. Handle securing knob
9. Grass catcher flap
10. Grass catcher
11. Quick release handle
12. Start/stop lever
1. ASSEMBLY
ECOMOW ELECTRIC MOWER
1
9
10
11 12
13
2
3
4
6
7
8
14
5
WARNING!:
ENSURE THE TOOL IS DISCONNECTED
FROM THE POWER SUPPLY BEFORE ASSEMBLY
.
Fitting the Lower Handle to Mower Body
1. The lower handle with the
cable clip attached must be
assembled on the power cable
side.
1. Place the upper handle over
the upper ends of the lower
handle. From the handle
securing set, fit the bolts
through the inner side of the
lower handle and then through
the hole in the upper handle.
Note:
When you fit the upper
handle you can decide the height
of the upper handle by selecting
the appropriate fastening hole.
2. Place a washer and secure
in place by screwing the
supplied handle securing
lever over the protruding ends
of the bolts.
Fitting the Upper Handle to the Lower Handle
Fitting the Rear Wheels
1. Place a wheel onto the axle as
shown.
2. Secure the wheel with a
washer and p-clip.
3. Push the hub cap onto the
centre of the wheel so it clicks
into place.
2. Fit and secure in place with
the lower handle washer and
securing knob.
4. Repeat this process for the
remaining wheel.
15
13. Rear wheel set
14. Lower handle securing set
15. Upper handle securing set
