DPI-5000
4. INFLATING
2 Connect the unit to
the desired power
supply and switch the
power mode switch
into the correct
setting.
4 Adjust the target
pressure using the
target pressure
buttons.
NOTE:
The required
pressure should be
written on the item.
3 Insert / Attach the hose adaptor
to the item to be inflated.
5 Start inflating by pressing the
Run / Pause button.
The current inflation pressure
will display on the LCD screen.
NOTE:
The unit will automatically
shut off once the target pressure
has been reached.
1 Attach the required adaptor for
the job and ensure it is secured
with the hose locking lever.
Increase
Decrease
IMpORTANT:
BEFORE CONNECTING OR dISCONNECTING
ACCESSORIES, ALWAyS MAKE SURE ThAT ThE
INFLATOR IS OFF.
WARNING:
AVOId INFLATING ThE OBjECTS ABOVE
ThE RECOMMENdEd INFLATION pRESSURE. ThIS MAy
LEAd TO dAMAGE ANd/OR INjURIES.
5. REPLACING 12V DC FUSE
1 Unscrew the top of the 12V socket to expose the fuse.
The 12V socket is fitted with a 10A fuse to protect the inflator. If the unit
has stopped working and the LCD display does not illuminate, the fuse
may need to be replaced.
2 Replace the 10A fuse and screw the top back onto the 12V socket.
WARNING:
ENSURE ThE TOOL IS SWITChEd OFF ANd
dISCONNECTEd FROM ThE pOWER SUppLy BEFORE
pERFORMING ANy OF ThE FOLLOWING STEpS.
