background image

3 yeaR Replacement WaRRanty

Your  product  is  guaranteed  for  a  period  of 

36  months  from  the  original  date  of  purchase 

and  is  intended  for  DIY  (Do  It  Yourself)  use  only.  If  a  product  is  defective  it  will  be  replaced 

in accordance with the terms of this warranty. Warranty excludes consumable parts.

 

Warranty 

excludes batteries.

WaRninG

the following actions will result in the warranty being void.

Professional, Industrial or high frequency use.
If the tool has been operated on a supply voltage other than that specified on the tool.
If the tool shows signs of damage or defects caused by or resulting from abuse, accidents 

or alterations.
Failure to perform maintenance as set out within the instruction manual.
If the tool is disassembled or tampered with in any way.

ozito

Australia/New Zealand (Head Office)

1-23 Letcon Drive, Bangholme, Victoria, Australia 3175




WaRRanty

youR WaRRanty foRm SHould Be Retained By you at all timeS. in 

oRdeR to maKe a claim undeR tHiS WaRRanty you muSt RetuRn 
tHe pRoduct to youR neaReSt BunninGS WaReHouSe WitH youR 

BunninGS ReGiSteR Receipt.

pRioR to RetuRninG youR pRoduct foR WaRRanty pleaSe 

telepHone ouR cuStomeR SeRVice Helpline:

australia 1800 069 486

new zealand 0508 069 486

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL NUMBER AND 

DATE OF PURCHASE AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE 

WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS YOU MAY HAVE 

RELATING TO THE WARRANTY POLICY OR PROCEDURE.

`

The benefits provided under this warranty are in addition to other rights and remedies which 

are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a 

replacement or refund for a major failure and for compensation for any other reasonably 

foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if 

the goods fail to be of acceptable quality and the failure does not amount to a major failure. 
Generally you will be responsible for all costs associated with a claim under this warranty, 

however, where you have suffered any additional direct loss as a result of a defective product 

you may be able to claim such expenses by contacting our customer service helpline above.

OW6

Summary of Contents for CDR-014



















Reviews: