FWD
REV
3. CONTROLS
Forward/ Reverse Lever
Adjusting Torque
Variable Speed Trigger
1 For forward rotation, push the fwd/rev lever towards the left side of
the drill. For reverse rotation push fwd/rev lever to the right.
The indicator lights will illuminate to show direction of rotation
1 To start drilling squeeze the
variable speed trigger.
When drilling in forward rotation,
front arrow will illuminate.
2 To stop drilling release the
trigger.
When drilling in reverse direction,
back arrow will illuminate.
Note:
The more the variable speed trigger is depressed, the faster the
drill bit will rotate.
Turn torque ring to the
desired setting. Refer to
Helpful Tips for determining
desired setting.
2. KEYLESS CHUCK
Installing a Drill Bit
Removing a Drill Bit
4 Tighten the chuck by turning
clockwise.
3 Insert the drill bit,
making sure it
is centred in the
chuck.
CAUTION:
TO REDUCE THE RISK OF INjURY WE
RECOMMEND THE USE OF GLOVES WHEN HANDLING
DRILL BITS.
WARNING:
ENSURE THE TOOL IS TURNED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.
OPERATION
1. Hold the back sleeve of
the chuck with one hand.
2. With the other hand, turn
the first chuck sleeve anti-
clockwise.
5. Ensure the bit is firmly in
place.
1. Hold the back sleeve while
turning the front sleeve
clockwise to open chuck.
2. Remove the drill bit.
