8
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge,
unless they have been given supervision or instruction concerning use of
the appliance by a person responsible for their safety.
Children should be supervised
to ensure that they don't play with the appliance.
Recommendations for the use of a residual current device
with a rated residual
current of 30mA or less.
Using an Extension Lead
Always use an approved extension lead suitable for the power input of this tool. Before
use, inspect the extension lead for signs of damage, wear and ageing. Replace the
extension lead if damaged or defective.
When using an extension lead on a reel, always unwind the lead completely. Use of an
extension lead not suitable for the power input of the tool or which is damaged or
defective may result in a risk of fire and electric shock.
It is recommended that the extension lead is a maximum of 25m in length. Do Not use
multiple extension leads.
Over Charging Protection
This feature ensures that the battery (5) is never overcharged. When the battery (5) has
reached its full charge capacity the charger will shut off protecting the internal
components of the battery (5) from being damaged.
Over Discharge Protection
The battery (5) includes an over discharge protector. This feature stops the battery (5)
from discharging beyond the recommended lowest safety voltage.
Over Heat Protection
The battery (5) has an internal thermal cut-out device that stops the charging cycle if
the battery (5) becomes hot during the charging process. This thermal cut-out device
also stops the battery (5) from operating should the battery (5) become too hot during
the operation of the tool. This can happen when the tool is overloaded or being used
for extended periods of time.
Up to 30 minutes cooling time may be required depending on ambient temperature
and the operation being performed.
Over Current Protection
If the battery (5) is overloaded and the maximum current draw is exceeded the battery
will temporarily stop working to protect the internal components. The battery (5) will
resume normal operation once the current draw has returned to its normal safe level.
This may take a few seconds.
Short Circuit Protection
If the battery (5) short circuits, the short circuit protector immediately stops the battery (5)
from operating.
This ensures that no internal components of the battery (5) or tool are damaged.
DRILL SAFETY WARNINGS! ADDITIONAL SAFETY RULES (cont.)
!!
LITHIUM ION BATTERY AND CHARGER SAFETY FEATURES
Summary of Contents for CDL-018
Page 1: ......
