![background image](http://html1.mh-extra.com/html/ozito/bgbs-240/bgbs-240_instruction-manual_1666667004.webp)
Fitting the Sanding Belt Tool Rest
1. Push the supplied bolt through
the recess in the belt guard
where you want to fasten
the tool rest.
2. Place the tool rest onto the bolt,
then the supplied washer and
toothed washer.
3. Secure the tool rest in place
using the tool rest adjustment
knob. Do not fully tighten until
the final adjustments have been
made.
4. Adjust the tool rest so that the
distance between the sanding
belt and the tool rest is as
small as possible and does not
exceed 2 mm. Tighten the tool
rest adjustment knob.
The Bench Grinder & Belt Sander comes with two tool rest that aid
the user in holding items steady as they are being applied to the
grinding wheel and sanding belt.
Fitting the Grinding Wheel Tool Rest
1. Push the screw through the
recess in the wheel guard
cover.
2. Mount the tool rest, then the
supplied washer and toothed
washer
3. Secure the tool rest to the
wheel guard cover using the
tool rest adjustment knob. Do
not fully tighten until the final
adjustments have been made.
4. Adjust the tool rest so that the
distance between the grinding
wheel and the tool rest is as
small as possible and does not
exceed 2 mm.
5. Tighten the tool rest
adjustment knob.
NOTE:
Adjust the tool rest
periodically to compensate for
wear on the grinding wheel.
2. FITTING THE TOOL RESTS
2 mm
Max.
2 mm
Max.