![background image](http://html.mh-extra.com/html/ozito/asg-lpr/asg-lpr_instruction-manual_1666500002.webp)
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1 Nozzle
2 Nozzle Collar
3 Suction Tube Locking Nut
4 Paint Pot
5 Variable Trigger
6 Air Regulator Valve
7 Air Inlet
8 Fluid Adjustment Dial
9 Fan Adjustment Dial
LOW PRESSURE SPRAY GUN
KNOW YOUR PRODUCT
1 2
3
4
5
6
7
8 9
1. ASSEMBLY
SETUP & PREPARATION
1 Slide the paint pot over the
suction tube an align with
the 3 tabs in the lid.
3 To remove, simply rotate
the paint pot anti-clockwise
and remove.
1 Wrap the threaded male air
inlet of the spray gun with
teflon tape in a clockwise
direction.
3 Pull back the sleeve on
hose fitting, insert male
end & release sleeve on
hose fitting.
2 Rotate the paint pot
clockwise to secure in
place.
2 Screw the female fitting
clockwise onto the male
end of the air inlet.
Installing the Paint Pot
Attaching to Compressor
WARNING
! ENSURE THE TOOL IS DISCONNECTED FROM
THE AIR SUPPLY BEFORE PERFORMING ANY OF THE
FOLLOWING OPERATIONS.