ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1 Nozzle
2 Nozzle Collar
3 Variable Trigger
4 Fan Adjustment Dial
5 Paint Pot
6 Air Regulator Valve
7 Air Inlet
8 Fluid Adjustment Dial
9 Air Vent
GRAVITY FEED SPRAY GUN
KNOW YOUR PRODUCT
1 2 3 4 5
6 7 8 9
1. ASSEMBLY
SETUP & PREPARATION
WARNING!
ENSURE THE TOOL IS DISCONNECTED FROM
THE AIR SUPPLY BEFORE PERFORMING ANY OF THE
FOLLOWING OPERATIONS.
1 Align the paint pot with the
hole on the top of the spray
gun.
1 Wrap the threaded male air
inlet of the spray gun with
teflon tape in a clockwise
direction.
1 Simply place the filter into
the top hole of the spray
gun with the knob facing
up.
3 Pull back the sleeve on
hose fitting, insert male
end & release sleeve
on hose fitting.
2 Screw the paint pot in
tightly by hand.
2 Screw the female fitting
clockwise onto the male
end of the air inlet.
Fitting the Paint Pot
Attaching to Compressor
Inserting the Filter
