AGB-2200
4. ON/OFF SWITCH
5. GRINDING & CUTTING
3a
For grinding
The optimum angle is 10-15
°
to the workpiece. Do not apply
excessive pressure. Allow the tool to do the work. This will
prevent deep gouging.
1 To turn the grinder on, first push safety lock off trigger forward,
then depress trigger. Hold the trigger switch in this position for
continuous use.
2 To turn the grinder off, release the trigger switch.
Note:
Thegrinderisfittedwithasoft-startswitchforadded
safety.
A
B
A
B
10-15°
3b
For cutting
The optimum angle is 90
°
to
the workpiece. Do not apply
excessive pressure. Allow
the tool to do the work.
1 Ensure the workpiece is
securely held down.
2 Turn on the angle
grinder.
A
B
CAUTION:
REGULARLY CHECK THAT THE OUTER
FLANGE HAS NOT BECOME LOOSE DURING
OPERATION.
CAUTION!
TO REDUCE THE RISK OF ELECTRICAL
SHOCK, THE USE OF A RESIDUAL CURRENT DEVICE
(RATED 30mA OR LESS) IS RECOMMENDED.
