Connecting to the Compressed Air Hose
1 Insert the nipple of the air tool into the
quick-lock coupling of the air hose.
2 The quick-lock sleeve will spring forward
automatically, connecting the accessory.
Disconnecting
1 To disconnect the air tool, pull back the
sleeve on the quick-lock coupling and
remove the tool.
Switching On and Off
Note:
Itisrecommendedtouseinconjunctionwiththisappliancea
Residual Current Device (RCD) of rating not exceeding 30mA.
1 Attach the desired tool to the quick
release coupling of the air hose.
2 Connect the compressors power
cord to the mains power supply.
3 To switch ON the equipment, set the
On/Off switch to position “I” (On).
4 To switch OFF the equipment, move
the On/Off switch to position “0” (Off).
Disconnect the power cord from the
mains.
5 Run the attached air tool until no
compressed air remains in the hose.
2. OPERATION
OPERATION
a
b
a
b
IMPORTANT!:
WHEN RELEASING THE QUICK-RELEASE
COUPLING, BE SURE TO HOLD THE COUPLING PIECE
TO PROTECT YOURSELF AGAINST INJURY FROM THE
REBOUNDING HOSE.
IMPORTANT!:
BEFORE CONNECTING OR DISCONNECTING
ACCESSORIES, ALWAYS MAKE SURE THAT THE
COMPRESSOR IS OFF.
a
b
WARNING!:
COMPRESSED AIR CAN BE A
DANGEROUS FORM OF ENERGY. GREAT CARE IS
REQUIRED WHEN USING THE COMPRESSOR AND ITS
ACCESSORIES.
