1 Paint Outlet
2 Variable Trigger
3 Air Inlet
4 Paint Regulator Dial
5 Paint Inlet
6 Paint Pot
AIRBRUSH
KNOW YOUR PRODUCT
1
2
3
4
5
6
7
8
9
10
1. ASSEMBLY
SETUP & PREPARATION
The kit comes with 2 paint pots, one with a standard lid for
storage and one with the airbrush connection lid.
2 Push the outlet of the paint
pot lid into the airbrush
paint inlet tightly.
1 Screw the airbrush
connection lid to the paint
pot.
1 Wrap the threaded male
air inlet of the airbrush
and connection hood with
teflon tape in a clockwise
direction.
The airbrush can be connected to either an air compressor
rated at the operating pressure or a compressed air can using
the connection hood.
3 Screw the connection hood
onto the compressed air
can until finger tight.
2 Screw the 1/8” bsp female
end of the air hose onto the
airbrush and connection
hood.
Installing the Paint Pot
Attaching to a Compressed Air Can
WARNING!
ENSURE tHE tOOl IS dISCONNECtEd fROm
tHE AIR SUPPly BEfORE PERfORmING ANy Of tHE
fOllOWING OPERAtIONS.
7 Paint Pots
8 1.5m Air Hose
9 Connection Adaptor
10 Connection Hood
ACCESSORIES
Attaching to Air
