HDR-3000
3. CONTROLS
4. DRILLING
1. Depress and release
the variable speed switch
to ensure it is not locked
on.
3. Secure the material to be drilled in a vice or clamp to stop it
turning whilst drilling.
4. Plug the hammer drill into the power supply.
5. Hold the drill firmly and place the bit at the point to be drilled.
2. Check the forward/
reverse lever for the correct
setting.
Before connecting to a power supply, perform a few simple checks.
3. To set hammer mode, slide the selector to the hammer icon.
For drilling mode, slide to drill bit icon.
2. To set the drill to forward
rotation, move lever to
the right. For reverse
rotation, move lever to
the left.
6. Depress the variable
speed switch to start the
drill.
7. Move the drill bit into the
workpiece.
Note:
Do not force the drill or apply side pressure to elongate the
hole. Let the drill do the work.
fwd
rev
fwd
rev
1. For faster speed, rotate speed selection dial clockwise. For
slower speed, rotate dial anti-clockwise.
drill
hammer
Speed Selection Dial
Hammer Selector
Forward/Reverse Lever
