2. CHUCK
3. ON/OFF SWITCH
2. To start drilling squeeze
the variable speed
switch.
3. To stop drilling release
the switch.
1. Open the chuck jaws.
4. Ensure the chuck
has a firm even
grip around the bit.
3. Tighten the chuck jaws.
2. Insert the drill bit,
making sure it is
centred in the jaws.
OPERATION
4. To lock the drill on,
squeeze the variable
speed switch then the
lock on button.
5. Release the variable
speed switch, then the
lock on button.
6. To unlock the drill,
squeeze and release
the variable speed
switch.
Variable Speed Switch
Lock On Button
Keyless Chuck
hold
a
b
a
b
This tool is recommended for the use with a residual current
device with a rated residual current of 30mA or less.
1. Plug the tool into the mains power supply.
