9
8
Initialization
Press the “MEM” button to change the month.
Then press the “SET” button to confirm the month selected.
Proceed to set the day, hour and minute by following the same steps.
7
Initialization
The device calendar accepts year values from 2009 to 2030.
When the display reaches 2030 it will return to 2009.
Press and hold the “SET” button for 3-4 seconds. The year will
appear flashing on the screen.
Then press the “MEM” button to advance in increments of one
year.
Press the “SET” button to confirm the year and proceed to the
date setting.
6
Initialization
The icon indicating a user will appear when pressing the“SET” button.
Press the “SET” button again to change the current user.
Press the power “ ” button to confirm the user of choice. The
device will turn off.
Initialization settings include: user setting, year/date/time setting,
unit of measure, positioning sensor, and the voice/audio setting.
This device automatically stores 180 sets of values for 2 users
(2*90) with the date and time. Set all of the parameters before
taking a measurement for the first time, otherwise the unit will
display the default values by the system.
Initialization
Selecting a User
Selecting a User
Setting the Date and Time
Setting the Date and Time
Day Setting
Month Setting
Minute Setting
Hour Setting
SET
MEM
SET
MEM
SET
SET
MEM
SET
MEM
BP213
BP213
BP213
BP213
BP213
BP213
BP213
BP213
MEM
BP213
SET
BP213
MEM
BP213
Initialization
You can save your settings at any time and turn off the unit by pressing
the Start/ Stop “ ” button.
The unit icon will appear on the screen after confirming the minutes
minutes for the time.
The default unit of measurement is mmHg, which is the most commonly used
in the USA. To change the unit of measurement to kPa, press the "MEM" button.
Press the “SET” button to confirm the unit measure and proceed to the
position sensor.
Selecting the unit of measurement
Selecting the unit of measurement
Setting the year
Setting the year
MEM
BP213
MEM
BP213
MEM
BP213
SET
BP213
mmHg
kPa