manualshive.com logo in svg

Ozenda AR4505GW, Instruction Manual

Share
Download
Ozenda AR4505GW Instruction Manual Download Page 8

I

NTRODUCTION

1-2

•

Firewall with Stateful Packet Inspection, client privileges, intrusion 
detection, and NAT

•

NAT also enables multi-user Internet access via a single user account, 
and virtual server functionality (providing protected access to Internet 
services such as web, FTP, email, and Telnet)

•

VPN pass-through (IPSec-ESP Tunnel mode, L2TP, PPTP)

•

User-definable application sensing tunnel supports applications 
requiring multiple connections

•

Easy setup through a web browser on any operating system that 
supports TCP/IP

•

Compatible with all popular Internet applications

Applications

Many advanced networking features are provided by the ADSL Router:

•

Wireless and Wired LAN

The ADSL Router provides connectivity to 10/100 Mbps devices, 
and wireless IEEE 802.11g compatible devices, making it easy to 
create a network in small offices or homes.

•

Internet Access

This device supports Internet access through an ADSL connection. 
Since many DSL providers use PPPoE or PPPoA to establish 
communications with end users, the ADSL Router includes built-in 
clients for these protocols, eliminating the need to install these 
services on your computer.

Downloaded from 

www.Manualslib.com

 

manuals search engine

 

Summary of Contents for AR4505GW





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands