background image

A

DVANCED

 S

ETUP

4-27

To manually configure the encryption key, enter five hexadecimal pairs of 
digits for each 64-bit key, or enter 13 pairs for the single 128-bit key. 
(A hexadecimal digit is a number or letter in the range 0-9 or A-F.) Note 
that WEP protects data transmitted between wireless nodes, but does not 
protect any transmissions over your wired network or over the Internet.

WPA

Wi-Fi Protected Access (WPA) combines temporal key integrity protocol 
(TKIP) and 802.1x mechanisms. It provides dynamic key encryption and 
802.1x authentication service. 

 

Parameter

Description

Cypher suite

The security mechanism used in WPA for encryption.

Authentication

Choose 802.1X or Pre-shared Key to use as the 

authentication method. 
•802.1X: for the enterprise network with a RADIUS server.
•Pre-shared key: for the SOHO network environment 

without an authentication server.

Pre-shared key type

Select the key type to be used in the Pre-shared Key.

Pre-shared Key

Type in the key here.

Group Key Re-Keying The period of renewing broadcast/multicast key.

Downloaded from 

www.Manualslib.com

 

manuals search engine

 

Summary of Contents for AR4505GW





















































































































Reviews: