Packing the tent
1) Spread tent flat, distribute evenly.
2) Fold into quarters not to exceed the length
of pole bag.
3) Lay pole bag at opposite end from door.
Tightly roll bag, skin and fly forcing air
through unzipped door.
4) Secure with ties and place in carry bag with
stakes and accessories.
5) Tent must be clean and dry before storage.
Store off concrete floor.
Be certain campfires are extinguished.
Dispose of trash appropriately.
Dimension A should
be close to but not
exceed the length
of the pole bag.
A
Fold tent into a
rectangular shape.
Front of tent
(door unzipped)
Step 3: Position Fly and Attach Leg Poles
1) With roof frame constructed, unfold and position the fly on the tent as shown below.
2) With 2 persons, begin along front side of the long axis of the tent and attach leg poles (J, D-ring below R-spring) into the corner eave
connectors (fig.1). Place bottom of the legs onto the corresponding pins along the perimeter of the tent floor (fig.2).
3) Repeat along the other side of the long axis of the tent to attach corner leg poles.
4) Along the same axis, attach inner leg poles (I, D-ring behind R-spring) to the eave.
5) Attach leg poles (I) to the front room corners and shower room corners.
6) Attach hooks on the tent to leg poles (fig.3).
7) Wrap the hook and loop fasteners, at the corners of the fly, around the frame (fig.4).
8) Attach the plastic s-hooks on the fly to the d-rings on each leg pole (fig.5).
Attach Accessories
Disassembly
WT192117 10/18
1
2
3
4
5
1) Stake the closet corners.
2) To support the closets, at the back of the
tent insert the closet roof poles (I) through
the pole sleeves at the top of the closets.
3) Insert the top of the closet leg poles (H) to
the closet roof poles. Place bottom of the
legs onto the corresponding pins at the
tent floor.
4) Attach s-hooks on the closet flies to the
Leg poles.
5) Inside closet rod and shelf may be attached
to hooks and loops.
Step 4: Erect Closets
1) To take down the tent, disassemble in
reverse order.
2) Remove accessories (if included)
3) Remove and fold fly.
4) Be sure to leave doors and windows
unzipped to avoid zipper damage.
5) Remove stakes with hammers or stake
puller. DO NOT pull on tent.
6) Carefully disengage poles from pins. Push
poles away from you through the sleeves
to minimize risk of damage to tent or poles.
7) Keep poles and stakes together in bags
provided.
1) Dividers can be attached to loops along
the eaves of the tent and shower.
2) Movie screen may be attached to loops
around right side window.
3) Attach shower shelf to loops at corner of
shower.
Step 6: Attach optional lights
1) Insert battery pack (batteries not included)
into pocket along the eave (12’ top right
side of the roof and 6’ top front of the porch)
and close the flap.
2) Thread the light rope through the white
loops along the roof line. Secure the end of
the rope to the clip.
Step 5: Secure guy lines
1) Secure tent using all guy lines and stakes.
Tent must be secured for proper function.
2) Side vent may be stake open for added
ventilation.
