background image

WT192117

ASSEMBLY INSTRUCTIONS

Verify Package Contents and Assemble Poles

Tent : 1 each

1) Assemble the roof frame as shown below matching color-coded poles to color-coded
     connectors. Use the diagram below and the replacement parts listing on page 4
     as reference. Make certain the metal springs lock into place on all the connectors.
2) Attach ridge poles to pre-attached connectors:
     (A) BLUE/BLUE
     (B) GRAY/IVORY
     (C) BLUE/WHITE
3) Attach S-hooks along the ridge line of the tent to the frame.
4) Attach roof poles to pre-attached connectors:
     (F) YELLOW
     (G) GREEN
5) Attach eave poles to pre-attached connectors:
    (D) RED
    (E) PINK
    (H) ORANGE
6) Attach hooks along the roof lines to the frame.

1) Verify Package Contents and Assemble Poles

Poles : 48 (total)
( ) denotes color coding

Rainfly : 1 each

IMPORTANT NOTES:

* Assemble your tent before camping to become    
   familiar with the assembly.
* Two people are recommended for setup.
* Select a clean, level area for the campsite free                      
   of debris and sharp objects, away from a  

 

   natural watercourse.
* Use of a ground cloth is recommended to
   prolong the life of the tent floor and provide
   additional insulation and moisture protection.
* To prevent damage to the zippers, unzip the
   doors and windows of the tent prior to 
   disassembly allowing air to move freely.
* Seam seal the inside stitched seams of the tent.
   This will improve weather resistance. Available 
   in sporting goods departments. Discoloration
   may occur if applied to outside seams.

Hanging Shelf : 3 each

Tent Stakes : 35 each

Color Coded Conectors:
 21 each 

(A) Ridge Side (blue/blue) - 2 each

(B) Ridge Front (gray/ivory) - 1 each

(C) Ridge Rear(blue/white) - 1 each

Step 2: Assemble Roof Frame

 

Step 1: Spread and Stake Tent

1) Spread out the tent floor side down on a 
     flat, clean and level area.
2) Stake down the tent by inserting a stake 
     through the stake loops, located at the
     corners of the tent.
3) Hammer the stakes into the ground at a 45

0

     angle using a hammer or mallet.
4) Make certain the tent floor is pulled out 
     evenly and tightly.

Remote light : 2 each

WT192117    10/18

(H) Eave Shower (orange)  
       – 2 each

(I&J) Leg – 12 each

(K)  Closet Leg – 4 each

(G) Roof Front/Rear/Inner (green)  
       – 12 each

(F) Roof Side Corner (yellow)  
      – 4 each

(E) Eave Side (pink) – 2 each

(D) Eave Front/Rear (red) 
       - 6 each

Divider : 3 each

2 each

2 each

1 each

1 each

(M) Closet Rod – 2 each

(L)  Closet Roof – 2 each

G

G

G

G

G

G

G

F

F

F

F

G

G

G

G

B

C

G

D

D

D

H

H

D

D

A

A

D

E

E

Reviews: