Oz-View Wireless video intercom, Technical Manual

Page: 10 / 20

Oz-View Technical Manual V1.02 - 1
st
Jan 2011 10
at this time on 2nd handset monitor. If it shows “success” on the handset, then
it means that the coding is successful.
3).On the 2nd handset, press and hold the “ ” and “ ” buttons when the 2nd
handset monitor is in ON status until the screen shows “transmit code”, then
release the buttons and enter the “transmit code” status.
4).During this time, press the call button in 2nd outdoor call station until you
hear two Di Di tones. Then release the call button in the outdoor call station
(Do not release the button until you hear the two Di Di tones). If it shows
“success” in the handset, it means that the coding has been successful.
5).If all the coding is successful, press the “ ” button in the 1st handset
monitor to return to the standby status.
Note: After coding the 2nd call station, you should press the call button
on the 2nd call station to call handset monitor to confirm and identify the
ID. Of the 2nd call station.
Code clearing
Handset monitor: Keep pressing the “ ” and “ ” buttons when the handset
monitor is in OFF status. At the same time, then press the ON/OFF
button in the handset monitor together until the screen displays “clear code”
and creates one “Di” sound (still keep pressing the “ ”and “ ” buttons
when you press the ON/OFF button). This means that code clearing is
successful. It will be in OFF status after releasing the buttons.
You can also press the “ ” button to carry out the code-clearing.
Outdoor call station:
Press the code-clear button (the code-clear button is in the back of outdoor call
station, for details, please refer to the lock connection section. Its icon is.) and
it creates one “Di” sound. This means that code clearing is successful.
Note: Be careful when doing this, as it will cause a malfunction. You will
then need to carry out the coding procedure of outdoor call station and
handset again. See above for CODING and RECEIVE CODE sections.
Setting of ring tone
Press the “ ” (ring tone selection button) when the handset monitor is in
standby status, until a ring tone sounds, the monitor is now in ring tone
selection mode. At this time, press the “ ” button successively to choose
another tone (A total 12 ring tones are available for selection). After choosing
your favorite tone, press the “ ” button to confirm, or wait until the playing
tone is ended, then it will auto-exit.