EN pg.4
DON’T
lift more than the rated load for the hoist.
DON’T
apply the load unless load chain is properly seated in the chain sprocket(s).
DON’T
operate hoist when it is restricted from forming a straight line from hook to hook in the direction
of loading.
DON’T
operate beyond the limits of the load chain travel.
DON’T
leave the load unattended unless specific precautions have been taken.
DON’T
apply the load to the tip ofthe hook or to the hook latch.
DON’T
attempt to lengthen the load chain or repair the damaged load chain.
DON’T
apply load if bearing prevents equal loading on all load supporting chains.
DON’T
operate unless load is centered under the hoist properly.
DON’T
operate a hoist until it has been securely attached to a suitable support.
DON’T
allow the load chain or hook to be used as an electrical or welding ground.
DON’T
allow the load chain or hook to be touched by a live welding electrode.
DO’s
DO
shut down a hoist immediately if it malfunctions or performs unusually and report such malfunction.
DO
warn personnel of an approaching load.
DO
make sure that the hoists limit switches function properly.
DO
take up slack carefully - make sure the load is balanced and the load holding action is secure before
continuing.
DO
protect the hoist’s load chain from weld splatter or other damaging contaminants.
PRODUCT CAUTIONS:
Caution indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury, or property damage.
DON’Ts
DON’T
adjust or repair the hoist unless qualified to perform such adjustments or repairs.
DON’T
allow the hoist to be subjected to sharp contact with other hoist, structures or objects
through misuse.
DON’T
allow your attention to be diverted from operating the hoist.
DON’T
use the hoist overload limiting clutch to measure the load.
DO’s
DO
inspect the hoist regularly, replace damaged or worn parts and keep appropriate records
of maintenance.
DO
lubricate load chain per hoist manufacturer’s recommendations.
DO
use Mechanics Hoist CH recommended parts when repairing the hoist unit.
DO
check brake function by tensioning the hoist prior to each lift operation.
DO
maintain firm footing or be otherwise secured when operating the hoist.
DO
make sure the hook latches are closed and not supporting any parts of the load.
DO
use hook latches. Latches are to retain slings, chains, ect. under slack conditions only.
DO
avoid swinging the load or hook.
DO
make sure the load is free to move and will clear all obstructions.
DO
make sure the hook travel is in the same direction as shown on the controls.
CAUTION
