Oyster L188TRS, Operator'S Manual

Page: 16 / 48

16
4. OPERATING THE "OYSTER
®
TV"
4.1 Initial setup
Your Oyster TV set is configured at the factory with a standard channel list and, depending on specifications,
with favourite lists. (See section 4.5, Favourite lists (satellite TV) if you wish to create further lists.) Should any
channels be missing or if you wish to add further channels, you need to start the automatic channel scan.
Select a signal source. If using a ten Haaft satellite system, DVB-S must be selected.
Press
Source
to open the signal input menu.
Press to select the input, then press
OK
to confirm. If no source is selected using the
OK
button, the
system will automatically switch back to the current signal source after a few seconds.
Press
EXIT
to exit the menu. The following signal inputs can be selected. Press the corresponding buttons on the
remote control:
• Digital TV
• Satellite TV
• AV
• HDMI 1
• HDMI 2
• USB