Page
3
Manual Version: v1.0
Model Code: 3395
Oypla.com LLP / www.oypla.com
Contents
1
Front Cover
-
2
Safety
Instructions
-
3
Assembly
Instructions
-
4
Cleaning and
Maintenance
-
4
Technical
Information
-
5
Back Cover
End
Assembly Instructions
To assemble your lamp, please follow the below instructions and accompanying
diagram.
1.
Remove all of the lamp parts from
the carton, and carefully place them
to one side.
2.
Take the
“
flex pole
”
and thread the
power cord through the lower pole.
Twist the lower pole clockwise into
the flex pole, taking care not to pinch
the wires.
3.
Connect the two ends of the power
cord, using the lock connectors.
4.
Remove the rubber part, and
connect the metal connector with
the base, before removing the screw
from the metal connector.
5.
Check the direction of the lamp,
before aligning the lower pole with
the base using the small screw hole.
6.
Re-insert the screw that you
removed in step 4. Be careful to not
over-tighten the screw as this may
damage the product.
Light Bulb Installation
1.
Insert the bulb into the clips on the
lamp head. Put one side of the bulb
against one clip, before softly
pushing the second clip to insert the
other side of the bulb.
2.
Gently push the bulb into the socket.
When the bulb is inserted fully, you
will notice a click.
3.
To replace/remove the bulb, follow
the above instructions in reverse
order.
