USER MANUAL Model No: 3391/3476
3. Insert a platform pole into each hole in the frame ends. Make sure they are secure so they don’t come loose when
they are in use. After this, place the wire platform on top of the platform poles. Please see the images above.
If you wish to make the flower staging any higher, repeat the two previous steps.
2. Place a wire platform on the platform poles. After
this, insert frame support poles into the holes on the
frame end and push a frame end on top. Repeat this
on the opposite side. Please see the image to the left.
1. Place a frame end on the floor and insert
platform poles into the holes in the frame
end. After this, push a frame end onto the
other end of the platform poles. Please see
the image to the right.
Please retain a copy of all instructions for future
consultation.
Imported into the EU by Oypla.com LLP, Uxbridge, UB8 2FX
