background image

 

 

 

Oxford Technical Solutions Ltd 

www.oxts.com 

Page 1 of 22 

 

 

Legal notices 

Information furnished is believed to be accurate and reliable. However, Oxford Technical Solutions 
Limited assumes no responsibility for the consequences of use of such information nor for any 
infringement of patents or other rights of third parties which may result from its use. No licence is 
granted by implication or otherwise under any patent or patent rights of Oxford Technical Solutions 
Limited. Specifications mentioned in this publication are subject to change without notice and do not 
represent a commitment on the part of Oxford Technical Solutions Limited. This publication 
supersedes and replaces all information previously supplied. Oxford Technical Solutions Limited 
products are not authorised for use as critical components in life support devices or systems without 
express written approval of Oxford Technical Solutions Limited. 

All brand names are trademarks of their respective holders. 

The software is provided by the contributors “as is” and any express or implied warranties, including, 
but not limited to, the implied warranties of merchantability and fitness for a particular purpose are 
disclaimed. In no event shall the contributors be liable for any direct, indirect, incidental, special, 
exemplary, or consequential damages (including, but not limited to, procurement of substitute goods 
or services; loss of use, data, or profits; or business interruption) however caused and on any theory 
of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any 
way out of the use of this software, even if advised of the possibility of such damage. 

Copyright notice 

© Copyright 2021, Oxford Technical Solutions. 

Unauthorised use, copying or distribution is not permitted. All brand names are trademarks of their 
respective holders. 

The software also includes software in binary form from: 

Xiph.Org Foundation at xiph.org. Copyright © 2002, Xiph.org Foundation 

TI at software-dl.ti.com. 

Copyright © 2002

–2015, Texas Instruments Incorporated All rights reserved. 

None of the names of the Xiph.org Foundation or Texas Instruments Incorporated, nor the names of 
their contributors may be used to endorse or promote this product or products using this software 
without specific prior written permission. 

Any redistribution of the software must reproduce the above copyright notice, this list of conditions 
and the following disclaimer in the documentation and/or other materials provided with the distribution. 

Revision 

Document Revision: 210326 (See Revision History for detailed information). 

 

 

Summary of Contents for xOEM500

























Reviews: