-6
-
5. SETTING MENU AND FUNCTIONS
1. Press the ENTER key to enter main
menu.
2. Press UP/DOWN key to select the
item for adjusting.
3. Press the ENTER key to enter the
sub menu of selected item.
4. Move the cursor to END at the
bottom line and press the ENTER to close the setup menu and return to normal
camera operation mode.
5. Move the cursor to INIT and press the ENTER to return all parameters to the
factory default settings. (Don’t press INIT unless it is necessary)
6. Move the cursor to DEMO and press the ENTER to enter function demo mode, turn
off the power or press the ENTER at 3 seconds to stop the demo.
7. Move the cursor to
↑
position and press the ENTER key for menu position setting.
8. Move the cursor to UNLOCK and press the ENTER to LOCK the setup menu.
Note
: If no button is pressed for 2 minutes while any setting menu displayed, all
modified data will be stored and returns to the normal camera picture mode.
6. Setting Procedure
6.1. Camera Identification Setting (CAMERA ID)
Move cursor to CAMERA ID then press ENTER key to enter ID sub menu
Move the cursor to the character you want to enter or modify by pressing UP, DOWN,
RIGHT, LEFT key. After selecting the character, by press the ENTER key, the
selected character will display on editing data area.
SETUP MENU
CAMERA ID
OFF
LIGHT CNTL
AES
WHITE BAL
ATW
D/N CNTL
PICTURE
VIDEO
DISPLAY
COLOR
POS
OPD WINDOW
MISC
END INIT DEMO
↑
UNLOCK
Character Area
CAMERA
ID
0 1 2 3 4 5 6 7 8 9 :
A B C D E F G H I J K
L M N O P Q R S T U V
W
X Y Z a b c d e f g
h i j k l m n o p q r
s t u v w x y z , .
□□□□□□□□□□□□
RET POSI
←
→
Blinking
Editing Data Area
Command area
UNLOCK PASSWORD
Press UP, DOWN, DOWN, RIGHT then ENTER key to unlock the menu.
