-12
-
2.
SCHEDULE
(D/N SWITCH TIME)
This function can set the time to change the
Day/Night mode.
CHOICE D/N TYPE: Press ENTER key to
switch D or N mode to conform to your setting
time.
※
If N
→
D time same with other, camera will plus 1 minute by itself.
3. EXTERNAL
This function allow use external device to
control camera switch to Night mode by HI
(+5V) potential or LOW (0V) potential.
※
Function 1~3 will action when back to first menu
(SETUP MENU)
4. DAY MODE
Switch to DAY mode.
5. NIGHT MODE
Switch to NIGHT mode.
6.5. PICTURE CONTROL
Menu item: VIDEO
→
PATTERN
→
APERTURE
→
GAMMA
VIDEO MENU
1. Chroma Gain setting
Move the cursor to CHROMA position, while
observing the monitor or vector scope, move the “I” bar
to adjust the color level.
2. HUE gain setting
Move the cursor to HUE position, while observing the monitor or vector scope, move
the “I” bar to adjust the TINT phase.
3. Brightness level setting
Move the cursor to BRIGHT position, while observing the color video monitor or
waveform monitor / oscilloscope , press LEFT/RIGHT key to adjust the brightness
level. Press ENTER key back to default brightness setting value.
VIDEO MENU
CHROMA |
•••
|
•••
|
HUE |
•••
|
•••
|
;
BRIGHT 90
PEDESTAL 7.5 IRE
SPRS EFCT 120
SPRS GAIN 48
RETURN
SCHEDULE MENU
D
→
N TIME HOUR :
00
MIN : 00
N
→
D TIME HOUR : 00
MIN : 01
CHOICE D/N TYPE
RETURN
EXTERNAL D
→
N MENU
INPUT SIGNAL
HI
RETURN
