Cypher SPM
User Guide
23
23
Inserting The Cantilever Holder On An
Environmental Scanner
Note:
If you own the standard scanner, please follow the tutorial in
holder on a standard scanner on page 148
.
You need the following items to perform the tutorial:
Cantilever
holder
The cantilever holder with required cantilever installed for your experiment.
See
Changing the cantilever on an environmental scanner on page 154
1. Rotate the Engage Control knob clockwise until it reaches its upper limit of travel.
If you do not raise the stage, you will crash the cantilever into the sample and ruin the can-
tilever, sample, and possible the cantilever holder.
2. If you have not already done so, ensure that the scanner is already pulled forward and any exist-
ing cantilever holder is removed.
See
Removing the cantilever holder on an environmental scanner on page 151
.
23 Inserting the cantilever holder on an environmental scanner
Page 157 of 243
