Cypher SPM
User Guide
21
21
Removing The Cantilever Holder On An
Environmental Scanner
Note:
If you own the standard scanner, please follow the tutorial in
holder on a standard scanner on page 141
.
1. Raise the cantilever holder.
l
Rotate the Engage Control knob on the Cypher clock-
wise and hold it until the cantilever holder is far from
the sample or is at its upper limit of travel.
If you turn the knob counterclockwise you will
lower the cantilever holder, risking collision with the
sample and damage to the scanner.
l
For safety reasons we recommend making motor
moves with the door closed. Beware of pinch points.
2. Lift the door latch and open the enclosure door.
21 Removing the cantilever holder on an environmental scanner
Page 151 of 243
