Assembly Instructions
page 3
Siena Chaise Lounge
Step 5
To secure right arm to the chaise body, first insert long bolt into the front upright
of the arm connecting it to the chaise body by inserting a barrel nut through the
bottom of the chaise as shown in the detail figure below. Then hammer two short
dowels through the back leg section and one dowel through the front arm section
to secure it to the large arm dowel. NOTE: Use the extra long bolt provided as a
guiding bolt in this step. See instruction at bottom.
B
F
D
C
B
D
F
F
Step 5 (detail)
B
D
F
F
How to align barrel nuts and bolts.
I
nsert a guiding bolt into the end of a barrel nut. Align the barrel nut inside of the component with the bolt used to connect the components.
Once the component bolt is aligned and threaded, simply pull the guiding bolt from the end of the barrel nut.
Step 6
Insert rear leg stretcher into the right rear leg as shown, and repeat
Step 5 to attach the left arm assembly. Once the left arm is in place, drive
two short dowels into each rear leg section to attach the rear leg
stretcher to the rear legs.
4
4
F
F
F
