background image

5

3.3  Connect to the gateway’s network

1. Set your gateway to permit joining. 
2. Plug in the in-wall smart plug and the LED indicator will start flashing 
(reset it if not).
3. The In-wall smart plug will join the gateway automatically and the LED 
indicator will turn steady when successfully joined. 
4. Now you can find the In-wall smart plug in the mobile app. 
Note

Please make sure the max. load current of all the connected 

appliances is no more than 15A (Two lines total).

4

FAQ

Q 1. 

How to pairing WSP406UK-2G in-wall smart plug and SLC602 remote 

switch? 
1. Make sure that the in-wall smart plug and remote switch have joined in 
the same gateway. 
2. Press the On/Off button of in-wall smart plug for 3 second until LED flash 
3 times then release. (when the smart plug enter pairing mode, LED will 
start flashing. )
3. Press the reset button of  remote switch for 3 seconds until LED flash 3 
times then release to enter pairing mode. 
4. Waiting the in-wall smart plug and remote switch pair automatically, 
when the two devices are bonding successfully, LED of in-wall smart plug 
will turn solid on, LED of remote switch will flash green light 3 times and 
then light off.
Now you can use the remote switch to control the in-wall smart plug. 

Remind:

The operating steps are same as above when WSP406UK-2G in-wall 

smart plug are pairing with SLC603 dimmer switch, RC204 remote control, 
KF205 remote control. 

Summary of Contents for WSP406UK-2G








Reviews: