3
Reset button
Reset Button
• Restart.
Press the reset button once to restart the device.
• Reset.
Press and hold the reset button for about ten seconds until the
Nixie tube displays "rst" to reset the device to default factory setting.
LED status
What it means
Orange
Device has joined the ZigBee network
.
Red
Device has not joined the ZigBee network
.
• LED light
The LED status gives the following information:
3
Get Started
3.1 To get started, you will need:
A ZigBee Gateway.
A mobile phone with the mobile App installed.
A remote control
.
3.2 Connect to the gateway’s network
1. Set your gateway to permit joining.
2. Plug in your split AC control, facing your IR device that you would like to
pair. See the diagram below to guide you in selecting a suitable position in
the range of the grey bars.
