©Owlstone Medical Ltd. 2018 - 2019
95-0009-001
10 July 2019
Page 10 of 18
The torque driver is set to 0.25 Nm and will click once the screw has
been sufficiently tightened. The screw cannot be overtightened as
the torque driver will just continue to click without tightening further.
The Tube Holder should be tightened after
securing the second end cap, as sealing both
ends of the tube should be prioritized over
other tasks
Once the Breath Biopsy Cartridge has been assembled, use the 02-
1898 Sorbent Tube End Cap Jig to check if the set easily passes
through it to ensure caps are correctly fitted.
If the Breath Biopsy Cartridge does not fit through, push the Travel
End Caps together with your palms.