2
PRECAUTIONS
SECTION 1: INTRODUCTION
LABEL INFORMATION
On the back of each OCM-C is a label similar to the one shown here containing model number,
serial number, power requirements, and special cautionary information.
USB port
6VDC, 1A
Directive 2002/96/EC of 27 January 2003 on waste electrical
and electronic equipment (WEEE)
EU Directives EN 61326-1:2006 (EMC) and EN 61010-1:2001
(Safety)
Power: 6VDC, 1 A
Eye Safety
look into the connector port of any fiber optic test or transmission equipment, patch cable, fiber link, or other
installed fiber. Always assume that active laser equipment is attached to optical fibers, and is powered on.
Electrical Safety
Only use appropriate AC adapters for charging this device. Use of inappropriate power adapters could cause damage to
the device, and could cause harm to the user from fire and electrical shock.
Operational
eep connector ferrules and optical connector ports clean to prevent irreparable damage to the test port. For best results,
replace dust caps after each use.
Connector
do NOT insert APC (Angled Physical Contact) connectors into the test port, unless the port is clearly
marked as APC.
Service
NEVER
K
Do not run OCM tests longer than is absolutely necessary to acquire scan data.
For best results,
There are no user-serviceable parts in this device. Unauthorized attempts to service this product will void the product
warranty.
MADE IN USA
Optical Channel Monitor
OCM-C
gt
n
h
e
l
L
e
a
v
b
a
o
W
r
a
l
t
a
o
c i
r
t
ie
p
s
O
MODEL# OCM-C
SERIAL# OC100001
Optical Wavelength Laboratories
Whitewater, WI 53190 • 262-473-0643
Conforms to the Harmonized European
Standards EN 61326-1 and EN 61010-1.
Power: 6VDC, 1 A
OWL
