OWL MPO, Operation Manual

Page: 13 / 17

SET REFERENCE - 3-JUMPER REFERENCE METHOD
TEST PROCEDURES
13
The meter screen will begin populating with reference levels for all fibers at all available wavelengths.
Press the UNITS button to view test results in dB (LOSS) mode if necessary.
1) Once all the job parameters have been entered, connect the units together as shown on the display, and make sure all the units are
powered on, and the light source is set to AUTO mode.
TESTING MPO CABLES
Optical Switch
MPO OWL
Optical Source
MPO OWL
AUTO
PINNED-TO-PINNED
TYPE B
PINNED-TO-PINNED
TYPE B
UNPINNED-TO-UNPINNED
TYPE B
MPO ADAPTER TYPE B
SWITCH
MPO SC SC MPO
METER SOURCE
Using your test reference
cables, please connect the meter
and source as shown and
press any key to proceed.
Optical Switch
MPO OWL
Optical Source
MPO OWL
AUTO
PINNED-TO-PINNED
TYPE B
PINNED-TO-PINNED
TYPE B
UNPINNED-TO-UNPINNED
TYPE B
MPO ADAPTER TYPE B
TEST LENGTH ZERO SAVE
LOSS MPO OM3
MPO LOSS / OWL
M=ER R=WA
MPO dB Power @ OPM OLS
PORT 850nm 1300nm
0 1 0.00 0.00
2 0.00 0.00
3 0.00 0.00
4 0.00 0.00
5 0.00 0.00
6 0.00 0.00
7 0.00 0.00
8 0.00 0.00
9 0.00 0.00
10 0.00 0.00
11 0.00 0.00
12 0.00 0.00
N/A BY: --.--
MPO ‘B’
EIA/TIA 568C.3 CON: 2 SPL: 0
50.0um CS1 LEN: 0m
HELP ENTER