OWI User Manual: Model AMP-BT2SIC5 / AMP-BT2SIC6 Speaker Amplifier
Model AMP-BT2SIC5 / AMP-BT2SIC6 Speaker Amplifier
OWI INC. 8 www.owi-inc.com
Mechanical “UL rating is dependent upon use of the Backcan and Tile Bridge”
SPECIFICATIONS
AMP-BT2SIC5
AMP-BT2SIC6
Speaker Diameter
5.25 inches
6.5 inches
Weight of Amplifier/Speaker Assembly
2.55 pounds
3.15 pounds
Height of Amplifier/Speaker Assembly
4 inches
4.5 inches
Backcan “Suitable for use in air
handling spaces”
UL Listed Enclosure
UL Listed Enclosure
Tile Bridge “Suitable for use in air
handling spaces”
UL Listed Support
Truss
UL Listed Support
Truss
POWER SUPPLY
PS15VDC35AL5
SPECIFICATIONS
Input
100 to 240 VAC, 50-60 Hz, 1.4A
Note: Be sure to use the correct polarity on the power input.
Output
15 VDC, 3.5 amperes
Wire gauge and length
Minimum 18 gauge up to 40 feet maximum length
Electrical, Power Supply
UL Listed,
Level 5
(Energy Star)
Weight
0.45 pounds
Size
4.7”H x 2”W x 1.2”D
CAUTION: The Power Supply is not to be used in air handling spaces.
*Note: Maximum power requires the replacement of the 15 volt supply with a 22 volt supply and Energy Star and
UL approvals no longer apply.
Power Supply Wire Gauge and Length - Minimum 18 gauge up to 40 feet maximum length
NON-AMPLIFIED SPEAKER
SPECIFICATIONS
IC5
IC6
DESCRIPTION:
5.25", 2-way, coaxial
6.5", 2-way, coaxial
IMPEDANCE:
8 ohms
8 ohms
SENSITIVITY (1W/1M):
85dB
86dB
DISPERSION:
120 degrees
120 degrees
MAX POWER (8 Ohms)
40 watts
50 watts
NOMINAL POWER (8 Ohms)
20 watts
25 watts
FREQUENCY RESPONSE:
80Hz ~ 20 kHz
65Hz ~ 20 kHz
WOOFER SIZE:
5.25"
6.5"
WOOFER MATERIAL:
Paper, PP coated
Paper, PP coated
TWEETER SIZE:
0.5"
0.5"
TWEETER MATERIAL:
PEI
PEI
GRILL MATERIAL:
Aluminum
Aluminum
OVERALL DIMENSIONS (Diameter X Height): Inches
Φ7.95*3.15
Φ8.93*3.45
CUT OUT SIZE (Diameter): Inches
Φ6.61
Φ7.68
WEIGHT: lbs.
2.26
2.5
MOUNTING HARDWARE:
Mounting Clamps
Mounting Clamps
End of Specifications
