OWC DIGITAL - MERCURY HELIOS
DEVICE SETUP
4
3. Push on the inner chassis at the rear to get the inner chassis to begin sliding out of the
outer enclosure, as shown below. When the inner chassis has moved far enough, pull on
the front of the inner chassis to remove it fully from the outer enclosure.
4. Turn the inner chassis so that the PCIe slot is facing up, as shown below. Using your fingers
or a Phillips screwdriver, remove the screw from the empty PCIe slot, circled below in red.
If you are installing a double-width PCIe card, remove the second screw and lift out the
PCIe slot cover. If you are not installing a double-width card, leave the PCIe slot cover in
place and proceed to the next step.
