background image

OWC Envoy Pro EX with USB-C

Device Setup

3

6. Reseat the bottom cover onto the top portion of the 

enclosure. Make sure the small cutout section where the 

thermal pad is, rests above the PCIe connector, not the 

drive mount screw.

If any edge or corner sits slightly 

above the others remove the screws, 

make sure the thermal pad is oriented 

correctly and then re-affix the screws.

7. Using the two screws removed in Step 2, plus the two 

remaining screws in the packet, secure the bottom cover 

to the top portion of the device. The cover should sit 

completely flush at the end of this process.

8. Last, take the two rubber feet, remove the adhesive 

strip from each, and place each over the cutouts on the 

bottom cover, as shown.

2.2 Usage Notes

 - This device does not function with USB Type-A to Type-C cables or adapters
 - With prolonged use, the drive case may be warm to the touch. This is normal.

For tips on formatting your new drive 

please visit

www.owcdigital.com/support/formatting

Reviews: