Instruction:
a) Connect the
2.5mm Quick Disconnect Cord
and connect it to the low right hand side of the
phone:
2. Adjust the length of the headband and turn the earpieces slightly until the headset fits
comfortably.
3. Put the earpiece on left or right ear.
4. At the other end of the headband, position the T-bar above your ear.
5. Rotate the microphone boom to put the microphone in front of the mouth.
6. To optimize the position of the microphone, adjust the microphone stem in either direction so the
microphone is close to the corner of your mouth and the white dot at the microphone should be
facing to your mouth.
7. Attach the clothing clip at a comfortable level to keep the headset properly positioned and free
form the cord’s weight.
8. Press the headset key on the telephone keypad to get dial tone to the headset, answer an
incoming call and disconnect call.
Cisco SPA Series Phone Keypad
