OVIO OHC-7000D, User Manual

Page: 9 / 24

9
Installation Precautions
When connecting the tubing hose, make sure that the tubing hose is not bent or pressed by heavy objects.
Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
When installing the product, do not install it in the following places.
Please use the following water quality conditions.
· Water pressure : 1.5~7kgf/㎠(0.15~0.7MPa)
· Water temperature : 5~35℃
· pH : 5.8~8.5 · Hardness : below 300 ppm
· Turbidty : 0.5 NTU or less than
· Water quality : Water quality suitable for drinking water standard
※ If the temporary flpw decrease such as washing dishes or bathroom showers during use of the product, cut off the water error of
the product may occur. At this time, when the flow returns to normal flow rate, it is automatically returned to normal operation.
When transporting the product, do not lay it over 45 degrees.
Do not use water other than tap water
Be sure to place the product horizontally on a flat surface.
For safe operation of the product, please make sure that the side and back side of the product are more than
10cm above the wall surface so that ventilation is smooth.
Do not connect hot water(Over 35℃) to the product.
※If the tubing hose is clogged, the water will not flow smoothly, which may cause malfunction.
※Severe tilting may cause performance degradation.
Do not install in low water pressure area of 1.5 kgf/㎠ or less because the water extract flow
rate may decrease.
※Please consult with us when using in other water quality than the above.
※If you do not use the water quality within the above condition without consulting with us,
it will be excluded from the warranty period.
※It may cause malfunction and failure.
※It may cause performance degradation and malfunction.
When installing the product, please use the original parts of our company.
When transporting the product, connect the power supply after 30 minutes.
When installing this product in one place with one or more other products(water purifier, dishwasher, etc.), be
sure to install raw water, drain water and drain tubing hose, etc. separately for each product.
※It may cause malfunction of the product.
※Inlet tubing, raw water valve, water filter, etc.
· Near fire
· Where snow or rain can fall
· Near chemicals(volatile substance, organic solvents, etc)
· A place that is below 0℃ or where it may fall to a temperature below 0℃
· Near flammable material · Humidity
· Outdoor or direct sunlight
· place close to toilett
· In front of air condition/heater
Do not install any heat-generating product near the heat sink on the backside.