background image

5

Safety Precautions

WARNING

WARNING

Power-related

If water is inside the purifier, 
unplug it and dry it thoroughly 

before use.

P l e a s e   u n p l u g   t h e   p o w e r 
plug  during  product  repair  or 

inspection and part replacement.

Do not connect the power cord  to 

muti-adaptor. Be sure to connect 

to an outlet of at least 16 amps.

Connect  the  power  plug 
with the cord facing down.

 Risk of electric shock and product.  Risk of electric shock and product.  Risk of electric shock and product.

· There will be a fire hazard.

Do  not  install  in  humid  or 
dusty areas.

Do not install on the uneven 
floor.

Do not install the product near 
any heating appliances and the 
locations where gas may leak.

Please install the product to avoid 
direct sunlight and high temperature.

Install the space on the wall with a 
distance of about 10 cm or more to 

ensure a smooth ventilation on the 
back of the product.

Please install the lenth of the tap 

water supply are connected to the 

product to 5m or less from the tap 

water supply valve.

·  Danger of electric shock fire.

·  Danger of electric shock fire.

· Cause product failure.

· Danger of fire electric shock.

May cause appearance deformation

·  Product may have overheat or malfunction.  

 · May cause degradation of product 

performance.

Do not use underground water 
other than tap water.

Please avoid installation where 
temperature goes down below 

0 degrees Celsius.

 · The timing of replacing filters may 
vary by region or water usage.

· Filters and icing inside the product 
cause product malfunction .

Installation-related

Within 5M

Water

Supply

(Cold)

Summary of Contents for OHC-7000D

























Reviews: