How to Operate each Mode
39
The file being played runs once, then stops.
The file being played will be repeated.
All the files in the folder will be played repeatedly.
Files to be played will be selected randomly and played.
Loop Repeat Function is not used.
Pressing
CH-
Button while Audio file is played will
setup the beginning of a Loop Repeat.
After the above icon is displayed,
if you want to setup the end of a Loop Repeat, press
CH-
Button once more, then the specified loop will
be played back repeatedly.
Depending on audio content, the above Loop Repeat Function may not be available.
If there are audio file A.mp3, and A.txt file in the same folder together, lyrics of the song can be displayed by using OK button
after audio file playback. In this mode, FF/RW button can be used for page Up/Down function. If you repress OK button,
Audio playback mode will be shown on screen.
By pressing REC button to select one of Korean/Chinese/Japanese/... to decode properly, ID3 information of MP3 in China
also can be decoded in Chinese properly. In case of English ID3 information, there is no need to press REC button to select
one of Korean/Chinese/Japanese/... format to decode.
- When Pressing the CH+ (*Fn+) Button
While Playing an Audio File
- When Pressing the CH- (*Fn-) Button
While Playing an Audio File
