background image

IP/APN/GPRS name & password/TIMEZONE are changed, and you need set these again by 

sending SMS.

 

 
 

How to Install

 

 

1.  First to buy a 2G GSM or 3G WCDMA mobile phone SIM card, which needs SMS service and 

incoming caller ID display and GPRS function, and please disable the PIN code of the SIM card, this 

SIM card phone number is the tracker number and all the operations (calling and sending SMS) to 

the tracker is this number. 

2.  Insert the tracker to the OBD socket is OK, it is not necessary to do any other installation, all 

cars later from year 2000 have OBDII interface, the OBD socket normally is under the car panel, if 

you can not find the OBD socket, check your car manual to find or call your car manufacturer hot line 

to confirm the OBD. 

3.  After insert the tracker to OBD socket, the tracker will power on automatically, the tracker 

uploading is controlled by shock sensor, if the tracker begin to move, the tracker begin upload the 

tracking, the tracker status on the platform will change to online immediately. if the tracker stop moving, 

the tracker will stop upload the tracking and turn off GPS & GPRS to go to sleep, a few minutes later 

the tracker status on the platform also will change to offline. If you like to keep the tracker always 

online, send SMS (keeponline*123456) to change the tracker working method is OK, but this will 

exhaust more data charge and car battery power, and if the car will park long time or the car battery is 

old, this maybe cause the car battery power low and can not start car engine. 

 

How to Use

 

 

After install SIM card and insert the tracker to OBD socket, you can send SMS to locate and chang 

tracker setting, the tracker use password(default is 123456) to control, every SMS command need add 

password, if you have set authorized number, some command don’t need add password,for better 

security please change the default password before using.

 

 

1.  After installation the tracker, park the car in the open place (indoor or underground can not 

receive the GPS signal), send SMS (LOCATE*123456) to the tracker number, the tracker will reply 

SMS with Google map link , click the link to visit internet, the map will display on your mobile phone. 

This means the GPS and GSM is working. 

2.

  Upload the tracking to internet server through GPRS, this tracker can auto download & config

 

 

-4-

 

Summary of Contents for PL630


















Reviews: