10400666-005
©2015-20 Overland-Tandberg
21
3
Replacing Parts
This chapter provides instructions for servicing the NEO S-Series Tape Library. Any removed
parts should be returned to Overland-Tandberg for service.
Topics in Replacing Parts:
•
•
Replace the Library Controller
•
•
Add or Replace a Tape Drive
Only individuals who are informed about the procedures and risks should replace or upgrade
this tape drive assembly. Read all troubleshooting documentation and procedures before
proceeding with repair or upgrade procedures.
WARNING:
To reduce the risk of electric shock or damage to equipment, always remove any
power cords while working with the library.
WARNUNG:
Um das Risiko eines elektrischen Schlags oder Schäden am Gerät zu vermeiden,
ziehen Sie stets den Netzstecker, bevor Sie an der Einheit arbeiten.
AVERTISSEMENT:
Pour réduire le risque de choc électrique ou endommagement de
l'équipement, retirez toujours les cordons électriques en travaillant avec l'appareil.
CAUTION:
While working with the library, observe standard Electrostatic Discharge (ESD)
precautions to prevent damage to micro-circuitry or static-sensitive devices.l
WARNING:
Hazardous moving parts exist inside this product. Do not insert tools or any portion
of your body into the drive bay openings.
WARNUNG:
Im Inneren dieses Produktes befinden sich gefährliche bewegliche Teile. Führen Sie
keine Werkzeuge oder Körperteile in die Öffnungen der Laufwerksschächte ein.
AVERTISSEMENT:
Ce produit comporte des pièces mobiles dangereuses à l'intérieur. Veuillez ne
pas insérer d'outils ou une partie du corps dans les ouvertures de chargeur de lecteur.
To replace a tape drive:
•
Make sure the tape cartridge has been removed from the tape drive. Use the operator
control panel (OCP) or the remote management interface (RMI) to move the cartridge to
a storage slot or mailslot.
•
If you are replacing the tape drive in a single drive library or the master drive in a multi-
drive library, verify that backups are not occurring on the drive you are replacing.
